-
硬性金属...
-
金属制造工...
-
adj.金属的,金属性的,金属制的,含金属的...
-
The causes of the wearable zone dropout were analyzed by the metallography analysis and SEM.采用金相分析和扫描电镜分析方法,分析了钻杆接头喷焊耐磨带脱落原因.The strain of the proeutectoid ferrite in hypoeutectoid steel drawing measured and analyzed by ...
-
n.金属移变作用...
-
adj.有金属特性的,像金属的,金属般的...
-
n.金属茂(合物),茂(合)金属...
-
Keywords: TiAl intermetallics, high temperature oxidation resistance, surface modification.关键词: 钛铝介金属 、 高温氧化抵抗 、 表面改质.In this article , progress in research on super - plasticity in intermetallics is reviewed, with focus...
-
No abnormity was found in the metallographical analysis and hardness test.金相和硬度分析未发现明显异常组织和硬度分布.The geometrical characteristics analysis of grain is the important base of metallographical analysis.晶粒的几何特征度量是金属性能分析的重要基础.T...
-
Result is microporosity, second - phase precipitation and inclusions of intermetallic or nonmetallic compounds.结果导致微孔 、 再生相沉淀和金属和非金属成分混杂.Intermetallic compounds possess many attractive properties for potential high tempe...
-
intermetallics的音标:intermetallics的英式发音音标为:[ɪntɜ:me'təlɪks]intermetallics的美式发音音标为:[ɪntɜme'təlɪks]...
-
v.使金属化,使…硬化...
-
metallomicroscopy的音标:metallomicroscopy的英式发音音标为:['metələmaɪkrəskəpɪ]metallomicroscopy的美式发音音标为:['metələmaɪkrəskəpɪ]...
-
metallurgies的音标:...