shear造句

In general, the deformation of the model grille is a combination of axial and shear strains.
一般情况下, 模型栅格的变形是轴向应变和切向应变的组合.

Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh.
米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试.

There may be widespread changes in ground elevation as well as horizontal or shear displacements.
地面标高可能发生广泛的变动,也可能发生水平位移或剪切位移.

For any load the function from load is in multiplication shear force by antisymmetry load.
任意荷载的作用含反对称荷载分量的图乘剪力的作用.

Textbooks commonly denote shear stresses by the symbol and two subscripts.
教科书通常用符号和两个脚标表示剪应力.

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.
斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.

Slitting knives are used to shear the fabric to a precise width.
横切刀被用来将布剪裁到精确的宽度.

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.
文摘: 斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.

The paper analyes interation shear , fluid forming process , and discuss the ore forming mechanism.
并在此前提下提出了构造-流体-岩石相互作用的金成矿机理.

The results show that there exists shear deformation in lower bainite transformation.
研究表明,下贝氏体相变过程中必定存在切变.

In the Hebrides they shear their sheep later than anywhere else.
在赫伯里兹，剪羊毛的时间比其他任何地方都要晚。

The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed.
探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响.

As a result the FRP shear contribution may be over - estimated.
因此,以往的方法高估了FRP条带的抗剪贡献.

Sheet Metal , Metalworking Guillotine , Shear, Bend Shear , New , Used, Machinery Sheet Metal.
采购产品金属板材, 金属加工(剪切, 弯曲)机械钣金.

Objective To study and shear bond strength of resin - reinforced glass ionomer cement ( RGIC ) on orthodontic brackets.
目的探讨两种树脂加强型玻璃离子水门汀对托槽粘结强度的影响.

The interfacial shear stress is a constant proportion of the bottom shear.
交界面的剪力与底部剪力之比是常数.

The pumps must be of the low shear Archimedes screw type.
泵必须是低剪切力的阿基米德螺旋式泵.

Without loss of generality, shear deformations will be neglected.
不失一般性, 忽略不计剪切变形.

Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.
测量界面粘结强度的间接方法包括层间剪切强度试验.

The novel - flocculant poly - nucleate aluminum hydroxy silicate - sulphate ( PASS ) was prepared and polysilicic acid under non - high shear condition.
在非高剪切力条件下,将硫酸铝引入到聚合硅酸中合成了新型聚硅酸硫酸铝 ( PASS ) 絮凝剂.

• #shear